Installation Instructions

HAVE A QUESTION? DO NOT GO BACK TO THE STORE. IF YOU NEED TECHNICAL

ASSISTANCE, PARTS OR IF YOU HAVE INSTALLATION OR WARRANTY QUESTIONS,

WE CAN HELP. PLEASE CALL OUR CUSTOMER SERVICE DEPARTMENT.

To better assist you, please have your model number (located on the customer

service tag) available when you call.

888-856-6322, 8am to 5pm PST Monday- Friday

Preparation / Assembly

Step 7-9

9. The pull-down sprayer (B) works in two modes: center jet and

dispersed spray. To switch between these modes, press the

top and bottom points on the spray head button (1).

8. Pull the faucet handle away from the faucet body (A) to

turn the water on. Push the faucet handle back towards the

faucet body (A) to turn the water o.

For cold water, pull the faucet handle towards you. For hot

water, push the faucet handle away from you.

7. Open the water supply and check all of the water

connections for leaks.

If you discover any leaks, check the connections to ensure

they are installed properly.

Remove the pull-down sprayer (B) from the faucet body (A),

and run the water for approximately 1 minute to ush the

lines.

Re-attach the pull-down sprayer (B).