Tools Needed, But Not Included For Models: 6736195 Adjustable Wrench Groove Joint Slier + Phillips Screwdriver Silicone Sealant » Knife Teflon Tape Included WINTER SET Maintenance Widespread Double Handle Roman Your new faucet is designed for years of trouble-free Tub Faucet with Handle Held performance. Keep it looking new by cleaning it Shower head periodically with a soft, damp cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and cold your warranty.
Parts Diagram / List 48 No.
Preparation/Assembly 1. Shut off the water supplies before Installation. Remove the current faucet. Clean and dry the surface the new faucet will be Installed on. 2. Remove clip (#40) to take apart tee Unscrew lock nut metal washer (#33) and rubber washer (#32) from underneath. 3 e:;n 3. Verify the O-ring (#11) is in place beneath the spout base Place silicone sealant beneath the spout base (#23) and insert the under body (#29) through the second hole from the left. See the diagram for a % visual. n ‘ 4.
Installation Instructions 56| 6. Remove the handle button (#53) and screw r Remove the handle assembly (#56) from the under body From underneath the mounting surface, insert the '6%" under body (#13) through the far right hole (hot water side). Ensure the O-ring (#11) is in the handle 86, base then place silicone sealant beneath "t the handle base (#10) and tighten it onto the 2 ! under body (#13) from above.
Installation Instructions 10. Installation with the Hand-Held Shower: Verify the check valve (#39) is in position inside the shower hose Slide the shower hose (#46) through the hole. Screw the shower hose (#46) onto the tee Hand tighten, then use an adjustable wrench to tighten. Do not over tighten. Note: Installations with out the hand-held shower stepsister 11. 11. Apply Teflon tape to the threads of the under body (#13) In a clockwise direction.
Troubleshooting If you've followed the Instructions carefully and your faucet still does not work properly, take these corrective steps. Problem Cause Action Leaks underneath the The cartridge (#12 or #35) has Tighten of replace the cartridge (#12 or #35) handle assembly come loose. ' Remove the handle assembly (#56) and cartridge (#12 or #35). Check the ceramic disk for dirt and damage. If the cartridge (#12 or #35) Is dirty, soak If In warm white vinegar for 4 hours.
