Installation Instructions

ManualsBrandsTuscany ManualsBathForden Two-Handle 1-Spray Polished Chrome Roman Bathtub Faucet with Handheld Shower

Table Of Contents

Summary of content (7 pages)

PAGE 1
Tools Needed, But Not Included For Models : 6736275, 6736276 6736277,6736278 Adjustable Wrench wu. + Groove Joint Slier W. SR « Phillips Screwdriver Silicone Sealant NF +» Knife [aa Teflon Tape Included of or Borden Maintenance Double Handle Roman Tub Faucet Your new faucet is designed for years of trouble-free with Hand Held Shower performance. Keep it looking new by cleaning it periodically with a soft, damp cloth.
PAGE 2
Parts Diagram / List = —47 roy] Part Name 1 Handle 2 | Screw 3 | Adapter 4 | Cartridge (Hot) 5 | Wearing Ring 4 | Handle Base 7 | O-ring 8 | Rubber Washer 9 | Metal Washer 10 | Lock Nut 11 | Screw 12 | Valve Body 13 | Set Screw 14 | O-ring 15 | Set Screw 16 | Bede 17 | O-ring 18 | Connect 19 | O-ring 20 | Seal joint 21 | O-ring 22 | O-ring 23 | Diverticulitis 24 | O-inf 25 | Rubber Washer 26 | Metal washer 27 | Lock Nut 28 | Tee Clip 29 | Tee 30 | Check Valve 31 | Spout 32 | Washer 33 | Aerator 34 | Aerator
PAGE 3
Preparation/Assembly 1. Shut off the water supplies before installation. Remove the current faucet. Clean and dry the surface the new faucet will be installed on. 2. Remove tee clip (#28) to take apart the tee Unscrew the lock nut (#27) and remove the gasket assembly (#57) from the diverted tube Note: Do not remove the customer service tag with the o 2 model number and phone number. This information will n—y, = 7} be needed when calling the customer service department. i 3.
PAGE 4
Installation Instructions 6. Remove the handle button (#51) and set screw , “ON Detach the handle (#1) and handle base (#6) from sw o the valve body f= 4 7. From underneath the mounting surface, insert the 4 valve body (#12) through the far left hole (hot water side). " Ensure the O-ring (#7) is in place in the handle base Apply silicone sealant beneath the handle base (#6) and tighten onto the valve body (#12) from above the mounting area.
PAGE 5
Installation Instructions 10. Hand Held Shower Installation: Step 1 0-1 4 Just call 1-800-626-3525 ,8 a.m. to § p.m. EST Monday-Friday, Verity the check valve (#30) is in position inside the shower hose Slide the shower hose (#54) through the hole. Screw the shower hose (#54) onto the tee Hand tighten, then use an adjustable wrench to tighten. Do NOT over tighten. Note: To Install with out the hand held shower skip steps 9 and 10.
PAGE 6
Troubleshooting If you've followed the Instructions carefully and your faucet still does not work properly, take these corrective steps. Problem Cause Action Tum off the water supplies. Open the handles (#1) to release the water pressure. Remove the handle button Leaks underneath the set screw (#13) and handle Tighten the handle Tho cartridge (#4 or #401195) cartridge (#4 or #40) If loose or replace the cartridge (#4 or #40).
PAGE 7
Lifetime Limited Warranty The manufacturer warrants that the parts and assemblies of this product will be free from defects in material and workmanship under normal household use for as long as it is owned by the original consumer purchaser. This warranty covers the original purchaser with original receipt only and does not include business, commercial or industrial use of this product. This warranty shall not apply to goods which have been subject to accidents, negligence or improper installation.