For Models : 675-1281 Audrey Towel Ring Tools Level + Power Drill < 1/4” Drill Bit = 1/16” Drill Bit » Masking Tape « Pencil « Hammer = Phillips Screw Driver Safely Glasses = Stud Finder @ Maintenance Your new Bath Accessory is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and void your warranty.
Parts Diagram / List Template Front View of Post Position Bracket and Drill Holes as Indicated jEL T ‘| 7~’ Towel Ring No. Part Name 1 Set Screws 2 Washer 3 Set Screws 4 Trim cap 5 Set Screw é Base 7 Stainless Steel Tube 8 Decorative Head 9 Washer 10 | Set Screw 11 Retainer 12 | Connector 13 Mounting Screws 14 Insert Anchors 15 Allen Wrench 16 Mounting Bracket 17 Template WARNING This bath accessory is not designed to be used as a grab bar.
Installation Instructions ggj Step 1 Locate mounting hardware before throwing away any packaging. Template Front View of Post Post ion Bracket and Drill Holes as Indicated s Towel Ring Step 2 @ Use the stud finder to locate the stud to determine which mounting steps needed. Place the template on the walling the desired location, make sure multilevel and then tape to the wall. 34 (19.3mm) Step 3 Mark the mounting screw holes through the template with the pencil. (Once holes are marked remove the template.
Installation Instructions Figure 1 Drywall Installation Front View Side View Screw Holes Drywall Step 4a Drywall or Ceramic Tile Installation n the marked spots drill 1/4" holes in the wall, hen insert the insert anchors (14) in the holes, use the hammer to tap them into place. (Be sure not to hit them too hard.
Installation Instructions Figure 2 Wood Wall Stud Installation Front View Side View Bracket crackerjack Screws Screw Holes Wood wall Step 4b Wood Wall Stud Installation Drill 1/16" hole sin the marked spots, be sure to keep the drill level. Insert anchors (14) will not be needed.
Installation Instructions 16 Hole % Hole Step 5 Dry Wall Installation: Attach the mounting bracket (16) using the mounting screws (13) to the insert anchors (14). See Figure 1 for an example. Wood Wall Stud Installation: Attach the mounting bracket (16) using the mounting screws (13) directly into the stud. See Figure 2 for an example. Step 6 Position the toweling over the mounting bracket (16) so the set screw socket is facing down to the floor.
Lifetime Limited Warranty The manufacturer warrants that the parts and assemblies of this product will be free from defects in material and workmanship under normal household use for as long as it is owned by the original consumer purchaser. This warranty covers the original consumer purchaser only and does not include business, commercial or industrial use of this product. This warranty shall not apply to goods which have been subject to accidents, negligence or improper installation.
Template Front View Position Bracket and Drill Holes as Indicated \ 3_ 3/4" (19.
