For Models : 675-1287 Esa 18" Towel Bar Tools Level = Power Drill = 1/4” Drill BIt = 1/16” Drill Bit Masking Tape = Pencil * Hammer = Phillips Screw Driver Safety Glasses = Stud Finder Maintenance Your new Bath Accessory is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and void your warranty.
Parts Diagram / List Template Frontward of ot Boston cockatoo ol s co oot e Ol rwe o enunciated 18" Tows! Bar (457mm) 10 z ° Part Name Set Screws Decorative Head Left Base Stainless Steel Bar Right Base Allen Wrench Mounting Brackets Insert Anchors Mounting Screws Template ololm|Njo oK w|N |~ WARNING This bath accessory is not designed to be used as a grab bar. Do not mount this item in a location where it could be used as a grab bar.
Installation Instructions g Step 1 Locate mounting hardware before throwing away any packaging. Step 2 Use the stud finder to locate the stud to determine which mounting step is needed. Place the template on the walling the desired location, make leisureliness and then tape to the wall. Step 3 Mark the mounting screw holes through the template with the pencil. (Once holes are marked remove the template.
Installation Instructions Figure 1 Drywall Installation Front View Side View Screw Holes Drywall Step 4a Drywall or Ceramicist Installation In the marked spots drill 1/4" holes in the wall, then insert the insert anchors(8) in the holes, use the hammertoe tap them into place.
Installation Instructions \\ 0 9 Figure 2 Wood Wall Stud Installation Front View Side View Bracket | _Bracket Screws Screw Holes Wood wall Step 4b Wood Wall Stud Installation Drill 1/16" hole sin the marked spots, be sure to keep the drill level. Insert anchors (8) will not be needed.
Installation Instructions Step 5 Dry Wall Installation: Attach the mounting brackets(7) using the mounting screws (9) to the insert anchors (8). See Figure 1 for an example. Wood Wall Stud Installation: Attach the mounting brackets (7) using the mounting screws directly into the stud. See Figure 2 for an example.
Installation Instructions Step 6 A Assemble towel bar as shown. B Position towel bar over mounting bracket (7) and tighten serf screws (1) using the supplied Allen wrench (6).
Lifetime Limited Warranty The manufacturer warrants that the parts and assemblies of this product will be free from defects in material and workmanship under normal household use for as long as it is owned by the original consumer purchaser. This warranty covers the original consumer purchaser only and does not include business, commercial or industrial use of this product.
Template Position Bracket and Drill Holes as Indicated Front View Level Line Position Bracket and Drill Holes as Indicated 11/16" (18mm) Towel Bar (457mm) N Have a question? DON'T GO BACK TO THE STORE, WE CAN HELP, Just call 1-800-626-3525, 8 a.m. to 5 p.m.
