For Models : 675-1292, 675-1301, 675-1347, 675-1342 Borden 18" Towel Bar Tools « Level « Power Drill * 1/4” Drill Bit « 1/16” Drill Bit « Masking Tape « Pencil ¢« Hammer « Phillips Screw Driver Safety Glasses = Stud Finder Maintenance Your new Bath Accessory is designed for years of trouble-free performance. Keep It looking new by cleaning it periodically with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and void your warranty.
Parts Diagram / List L Tom plate Front View Levine. 18 Towel Bar [457mm) Diaereses conditioned WARNING This bath accessory is not designed to be used as a grab bar. Do not mount this Part Name Tube Decorative Head Decorative Pipe Screw Set Screws Trim Cap Washer Nut Allen Wrench Mounting Bracket Insert Anchors Mounting Screws Template item in a location where it could be used as a grab bar.
Installation Instructions Step 1 Locate mounting hardware before throwing away any packaging. Front View pram e ;Bfi give Ling i 8" Tows! Bar (457mm) Step 2 Use the stud finder to locate the studs. Determine which mounting step is best for the installation. Place the template on the walling the desired location, verify iris level, and then tape it to the wall. — Peron headstand T Step 3 Mark the mounting screw holes through the template with the pencil. (Remove the template once the holes are marked.
Installation Instructions Figure 1 Front View Side View Drywall Step 4a Drywall or Ceramic Tile Installation In the marked spots drill 1/4" holes in the wall, then insert the insert anchors (#11) in the holes, use the hammer to tap them into place. (Be sure not to hit them too hard.
Installation Instructions Figure 2 Wood Wall Stud Installation Front View Side View Wood wall Step 4b Wood Wall Stud Installation Drill 1/16" hole sin the marked spots, be sure to keep the drill level. Insert anchors (#11) will not be needed.
Installation Instructions Step 5 Dry Wall Installation: Attach the mounting brackets (#10) using the mounting screws (#12) to the insert anchors See Figure 1 fora example. Wood Wall Stud Installation: Attach the mounting brackets (#10) using the mounting screws (#12) directly into the stud. See Figure 2 for an example.
Installation Instructions Step 6 A Assemble towel bar as shown. B Position towel bar over mounting brackets (#10) and tighten set screws (#5) as shown.
Lifetime Limited Warranty The manufacturer warrants that the parts and assemblies of this product will be free from defects in material and workmanship under normal household use for along as it is owned by the original consumer purchaser. This warranty covers the original consumer purchaser only and does not include business, commercial or industrial use of this product. This warranty shall not apply to goods which have been subject to accidents, negligence or improper installation.
Template Front View Position Bracket and Position Bracket and Drill Holes as Indicated Drill Holes as Indicated Level Line 11/16" (18mm) 18" Towel Bar (457mm) _| Have a question? DON'T GO BACK TO THE STORE, WE CAN HELP, just call 1-800-626-3525, 8 a.m. to 6 p.m.
