For Models : 675-1318 Winterset 18" Towel Bar
8 7 5 4 6 2 3 12 11 10 8 7 6 5 4 3 2 1 9 18" Towel Bar (457mm) 13 No.
18" Towel Bar (457mm) Use the stud finder to locate the studs. Determine which mounting step is best for the installation. Place the template on the wall in the desired location, verify it is level, and then tape it to the wall. 18" Towel Bar (457mm) (Remove the template once the holes are marked.
11 11 12 10 12 #11 .
12 12 (#11) 10
18'' (4 10 57mm ) 10 Dry Wall Installation: Attach the mounting brackets (#10) using the mounting screws (#12) to the insert anchors (#11). See Figure 1 for an example. Wood Wall Stud Installation: Attach the mounting brackets (#10) using the mounting screws (#12) directly into the stud. See Figure 2 for an example.
1 10 7 10 6 6 A - Assemble the towel bar as shown. B - Position the towel bar over the mounting brackets (#10), as shown, and tighten the set screws (#6).
Revised 09/12/19
18" Towel Bar (457mm)
