Installation Instructions
Table Of Contents
- 页 1
- 页 2
- 书签1E6D5205 O-ring
- 书签B25CC4F2 O-ring
- 书签54BBAEA7 Plastic Core
- 书签81B24CFE Ring
- 书签F2859ADF Core Cover
- 书签5F6C8001 Pulling Core
- 书签CF84B968 Sealing Plate
- 书签470C67A2 Washer
- 书签6DB5174E Washer
- 书签DA9382B9 Spout Assembly
- 书签AB0660E3 Protective Sleeve
- 书签E11D3C06 Screw
- 书签FFEEF0AC Knob
- 书签F874201B Spout
- 书签A3AC107A 1
- 书签773AF0C5 2
- 书签6362349A 3
- 书签3D0E185F 4
- 书签1454A631 5
- 书签3153AA13 6
- 书签FFFD8FCC 7
- 书签6A992076 8
- 书签101152F4 9
- 书签D506A7DE 10
- 书签948A6305 11
- 书签F5895702 12
- 书签8AC71CA1 13
- 书签8FD85DA4 14
- 书签E3F15079 15
- 书签F6F86EA2 16
- 书签01085D82 17
- 书签6B0FB82D 18
- 书签E26CE095 19
- 书签F7A6FC92 20
- 书签FEB03BA4 21
- 书签86A51677 22
- 书签FA241173 23
- 书签A1CD2296 24
- 书签1D9C5BF4 25
- 书签F823C2F2 26
- 书签6C70E94A 27
- 书签0B61406C 28
- 书签8AEE013D 29
- 书签85070F1E 30
- 书签DF01DB70 31
- 书签1DFCDC7E 32
- 书签1C17DA10 33
- 书签013288AC 34
- 书签F721C79D 35
- 书签A09D823B 36
- 书签6DEA38ED 37
- 书签3A4BA3F5 38
- 书签5D147A20 39
- 书签ADCA6913 40
- 书签EC342005 41
- 书签1C9FEF79 42
- 书签E340BFC0 43
- 书签FE216397 44
- 书签A7EAC61B 45
- 书签B1820735 46
- 书签F13AA214 Part Name
- 书签C897FAB4 No.
- 书签7C841AC4 Shower Arm Flange
- 书签4A3020BA Shower Arm
- 书签A0317924 Shower Head
- 书签EDD7BD8C Screws
- 书签FA019C15 Plaster Guard
- 书签BED107E2 Trim Cap
- 书签D129BF95 Lock Nut
- 书签9D276D7A Cartridge
- 书签E0315F5C Cartridge Housing
- 书签9C16C7C7 Valve Body
- 书签1EEFBD58 O-rings
- 书签1EAE38E9 Sealing Washer
- 书签31300DDF Stop Valve Core
- 书签F1860439 Stop Valve Spring
- 书签DCDABC35 Adjuster Seat
- 书签72DE8FE5 Escutcheon
- 书签DB82D6D8 Set Screw
- 书签941E9A0A O-ring
- 书签6E6856F8 Handle
- 书签6436A5F2 Allen Wrench
- 书签41399606 Teflon Tape
- 书签FC4F21A1 Adjuster
- 书签3C481926 O-ring
- 书签356A8CF3 4
- 书签4CCD2312 5
- 书签9C58FE81 6
- 书签D67F19D8 7
- 书签DABD1C3D 8
- 书签C2B4CF28 9
- 书签D0954FE9 10
- 书签7912A46F 11
- 书签D7C5E970 12
- 书签DE9AB169 13
- 书签4AC41E6D 14
- 书签E79E6C1D 15
- 书签462E2265 16
- 书签8E3AD2BF 17
- 书签7326FE23 18
- 书签C1A84CF4 24
- 书签DACE4079 25
- 书签7CBFA444 27
- 书签71DE19B3 28
- 书签F71590DB 29
- 书签AB44DFD0 30
- 书签C8EDAA47 32
- 书签A0EAE4F2 33
- 书签E10BE8AB 30
- 书签38555567 34
- 书签E1D767C3 35
- 书签318B73E9 36
- 书签330163CB 42
- 书签7301667F 37
- 书签06375461 22
- 书签F6C5CA18 38
- 书签EF7C008F 39
- 书签5D93A322 40
- 书签6D4EAB88 41
- 书签2C8FE529 Escutcheon Gasket
- 书签31404D53 Sealing Ring
- 书签A162493E 26
- 书签53C8B056 31
- 书签3CBF46C6 O-ring
- 书签31D608F5 Handle Button
- 书签E2AD3BCE O-rings
- 书签E86DEF85 Screws
- 书签25688264 43
- 书签08482FF3 44
- 书签F1347625 Stop Valve
- 书签F9E90B97 End Cap
- 书签0A1F203C Washer
- 书签D6F3EFCB 45
- 书签75FAB289 46
- 书签59C5C5E8 3
- 书签1C974BF9 19
- 书签2EF09669 20
- 书签A9624D79 21
- 书签882CCD1E 22
- 书签3FC95593 23
- 书签1B9D4EE7 2
- 书签0C013920 1
- 页 3
- 书签A9BD7025 Step 1-2
- 书签D785EC88 1. Note the minimum/maximum installation dimensions between the shower arm \(#2\), handle \(#23\) and spout \(#26\). Also note, if this is a thin wall mounting, the hole for the valve body \(#11\) must be 3-1/8" high x 5-1/8" long.
- 书签A5C115F5 2. If this is not a thin wall mounting, the plaster guard \(#6\) may be removed from the valve body \(#11\). Note: Secure the valve body \(#11\) to the support cross board for stability.
- 书签C014357E 6
- 书签664AAB67 11
- 书签9C577943 Revised on 03/24/20
- 书签FFE308E5 1/2-14NPT
- 书签374792C4 Recommended 74” \(1880mm\) Minimum From Floor To Showerhead, Or Greater As Desired
- 书签0ADBDAFD 5-7/8" \(150mm\)
- 书签2D19A954 7-7/8" \(200mm\)
- 书签516C593C 3-1/8" \(80mm\)
- 书签1890750C 5-1/8" \(130mm\)
- 书签4BA3A0F5 4" \(102mm\)
- 书签C9B4AD3D 7-5/16" \(186mm\)
- 书签5CBC3792 6-3/4" \(171mm\)
- 书签3BF90A19 Min 8"-Max 12" \(203mm-305mm\)
- 书签9465080C 78''min to finished floor
- 书签0B40D12C Floor
- 书签0A6DE53C Tub Rim
- 书签498A9E2B 1-1/2"-2-3/16" \(38mm-56mm\)
- 书签AA955006 4-1/2-14NPT
- 书签69A96B10 3-11/16" \(94mm\)
- 书签CC0E4B46 3-1/8" \(80mm\)
- 书签4911FB42 11/16" \(18mm\)
- 书签C304CAFA 3/8"-3/4
- 书签382D91D0 4"min-6''max
- 页 4
- 书签9159FE19 11
- 书签19B19A06 41
- 书签9B8D6CBD Installation Instructions
- 书签8D28C896 5. Install an elbow at one end of the pipe. Install the other end to the tub spout diverter \(bottom hole of the valve body \(#11\)\). Install a nipple that will extend 1-5/8" - 3-1/8" from the finished wall. Note: Piping from the tub spout diverter \(bottom port of the valve body \(#11\)\) to the tub spout outlet must be either 1/2" nominal copper pipe or 1/2" iron pipe. Do NOT use PEX or PVC for the tub spout drop. Using the incorrect piping will cause leakage behind the wall or improper function of the spout.
- 书签83273A17 11
- 书签C8E78EBD 11
- 书签A74909BD 41
- 书签C4DB9576 45
- 书签79A1AE56 46
- 书签F1F4A6E7 11
- 书签C34F5315 41
- 书签B3420122 46
- 书签800CBCC4 45
- 书签775103CB 4. Apply Teflon tape \(#41\) to all pipe threads. Install an elbow at one end of the pipe. Install the other end to the shower diverter \(top hole of the valve body \(#11\)\). Secure the shower elbow to a 2x4 bracing.
- 书签D539D1F7 4
- 书签B933CCC2 Step 3-5
- 书签9B47AA33 3. Shower Only: Plug the tub spout diverter \(bottom hole\) of the valve body \(#11\), using the washer \(#46\) and end cap \(#45\). Skip step 5 and 8. Tub Only: Plug the shower diverter \(top hole\) of the valve body \(#11\), using the washer \(#46\) and end cap \(#45\). Skip step 4 and 7. Note: For a watertight connection, wrap Teflon tape \(#41\) around all threads in a clockwise direction.
- 书签B20F519E Shower Only
- 书签D2702AD6 Tub Only
- 页 5
- 书签76469FAB Installation Instructions
- 书签6F93ED59 6. Turn on the hot and cold water shut offs and check for leaks. If leaks occur, refer to steps 4 or 5. Turn on the faucet and let the water run for one minute. This will help clear any debris that may have come loose during installation and prevent the system from becoming clogged. Turn off the water. Note: Turn on both the hot and cold water shut offs before turning the faucet on. Not turning on both will cause your cartridge \(#10\) to become pressure locked. If this occurs, see the troubleshooting guide.
- 书签9B27F1BD Step 6-9
- 书签AE317418 8. Slide the spout assembly \(#42\) over the nipple. Attach the spout assembly \(#42\) to the nipple with screw \(#36\), using Allen wrench \(#40\). See the diagram for a visual. Note: The spout \(#26\) can be screwed directly onto a threaded nipple. If this option is being used, unscrew the plastic core \(#32\). The plastic core \(#32\), ring \(#33\) and screw \(#36\) will not be needed. Measure the spout \(#26\) from the threads to the back of the spout \(#26\) to determine the length of nipple needed. Screw the spout \(#26\) directly onto the nipple.
- 书签DE3C6F3E 7. Slide the shower arm flange \(#1\) onto the longer end of the shower arm \(#2\). Wrap the threads of the longer end of the shower arm \(#2\) with Teflon tape \(#41\) and install to the shower drop. Wrap the threads in Teflon tape \(#41\). Verify the washer \(#43\) is in place between the shower head \(#3\) and the shower arm \(#2\). Install the shower head \(#3\) onto the shower arm \(#2\).
- 书签FDC1A833 9. Remove the protective sleeve \(#5\) from the plaster guard \(#6\) by twisting the protective sleeve \(#5\) counterclockwise.
- 书签7896EBAE 5
- 书签B50AE82D 6
- 书签947B028B 1
- 书签947DAC0A 2
- 书签AB6FC3AB 3
- 书签89FFCE1E 43
- 书签19B73232 42
- 书签AE4DDF67 40
- 书签477A1E8C 36
- 书签21B883F8 26
- 书签CAF1A101 41
- 页 6
- 书签E94A8297 Then use the set screw \(#22\) to secure the handle \(#23\). Insert the handle button \(#37\). See the diagram for a visual.
- 书签3805B5B7 12. Slide the handle \(#23\) onto the cartridge \(#10\).
- 书签B1BE5987 Installation Instructions
- 书签4771507F 10. Temperature Limiting Device: Remove the trim cap \(#7\) and lock nut \(#8\). By default, the temperature limiting device is set to the highest temperature setting \(A\). In order to reduce the temperature, remove the temperature limiting device \(the red cap\) and turn the device clockwise to the desired temperature \(position B or C\). Reinstall the lock nut \(#8\) and trim cap \(#7\).
- 书签D1FE6DE2 13. Turn on the water and check for leaks. If a leak occurs from shower arm flange \(#1\) or shower arm \(#2\) in the diagram, repeat step 7. If a leak occurs from spout assembly \(#42\), repeat step 8.
- 书签9E9BC0C0 Step 10-13
- 书签44614D14 11. Verify the escutcheon gasket \(#19\) and sealing ring \(#20\) are attached to the escutcheon \(#21\). Slide the escutcheon \(#21\) over the cartridge housing \(#9\) and secure it with screws \(#39\) and O-rings \(#38\). Note: Do not remove the customer service tag with the model number and phone number. This information will be needed when calling the customer service department.
- 书签6AE8DFA0 21
- 书签9401A2C5 38
- 书签18D1B971 39
- 书签CF8D250C 19
- 书签0AC0E651 1
- 书签326248AF 2
- 书签9F7771AA 20
- 书签1E61A610 9
- 书签A7C3B413 23
- 书签02624BF1 22
- 书签FC9CCABA 37
- 书签B9E668E1 10
- 书签BE1D5B1B 42
- 页 7
- 书签7A2C4490 Troubleshooting
- 书签74BDDFDA The lock nut \(#8\) has come loose or the O-ring on the cartridge \(#10\) is dirty or misaligned.
- 书签22AA725E The rubber valve seat at the base of the pressure balance cartridge \(#10\) is dirty or broken.
- 书签1B23EB32 The cartridge \(#10\) is dirty, damaged, or pressure locked.
- 书签C5F3A7A7 Turn off the water supplies. Turn on the handle \(#23\) to release the pressure, then close the handle \(#23\). Remove the handle button \(#37\), set screw \(#22\), handle \(#23\) and trim cap \(#7\). If the lock nut \(#8\) is loose tighten it. If the lock nut \(#8\) is tight, remove the lock nut \(#8\) and cartridge \(#10\). Verify the O-ring is clean and in proper alignment on the cartridge \(#10\). If the O-ring is dirty, rinse in warm water. Reinstall the O-ring onto the cartridge \(#10\). Reinstall the cartridge \(#10\), lock nut \(#8\), trim cap \(#7\), handle \(#23\), set screw \(#22\) and handle button \(#37\). Turn the water supplies on.
- 书签A24A2E70 Turn off the water supplies. Turn on the handle \(#23\) to release the pressure, then close the handle \(#23\). Remove the handle button \(#37\), set screw \(#22\), handle \(#23\) and trim cap \(#7\), lock nut \(#8\), and the cartridge \(#10\). Verify the rubber valve seat is damange free, clean, and in proper alignment on the cartridge \(#10\). If the rubber valve seat is damaged replace the cartridge \(#10\). If the rubber valve seat is dirty rinse in warm water. Reinstall the rubber valve seat onto the cartridge \(#10\). Reinstall the cartridge \(#10\), lock nut \(#8\), trim cap \(#7\), handle \(#23\), set screw \(#22\) and handle button \(#37\). Turn the water supplies on.
- 书签0CDD4FA8 Turn off the water supplies. Turn on the handle \(#23\) to release the pressure, then close the handle \(#23\). Remove handle button \(#37\), set screw \(#22\), handle \(#23\) and trim cap \(#7\), lock nut \(#8\), and the cartridge \(#10\). Inspect the cartridge \(#10\) for dirt and damage. Replace the cartridge \(#10\) if damaged. Shake the cartridge \(#10\) and verify the pressure balance spool \(located at the bottom of the cartridge \(#10\)\) is moving freely \(clicks when shaken\). If the spool is not moving, tap it on your hand until it begins to click. If the cartridge \(#10\) is dirty, soak it in warm white vinegar for 4 hours. Every 30 minutes, while the cartridge \(#10\) is submerged in the vinegar, rotate the stem on and off 10 times. Reinstall the rubber valve seat onto the cartridge \(#10\). Reinstall the cartridge \(#10\), lock nut \(#8\), trim cap \(#7\), handle \(#23\), set screw \(#22\) and handle button \(#37\). Turn the water supplies on.
- 书签2A75F347 Leaks underneath the handle \(#23\).
- 书签D368420B The water will not shut off completely.
- 书签B22D0A19 The water temperature cannot be adjusted or there is no hot or cold water.
- 书签DC6C2D5E 7
- 页 8
- 书签4930E000 The manufacturer warrants that the parts and assemblies of this product will be free from defects in material and workmanship under normal household use for as long as it is owned by the original consumer purchaser. This warranty covers the original purchaser with original receipt only and does not include business, commercial or industrial use of this product. This warranty shall not apply to goods which have been subject to accidents, negligence or improper installation. Our responsibility under this warranty is limited only to the replacement of parts and no other costs. Should a malfunction occur within the time covered by this warranty, replacement parts may be obtained from Customer Service Department 1-800-626-3525 or email warranty@cmiproduct.com. The manufacturer will, at its discretion, provide replacement parts for installation by consumer for any parts that prove defective under normal usage and care with new or equivalent parts.
- 书签1009CBB1 Revised on 05/16/2020
- 书签65067A9B 8