Installation Instructions
Table Of Contents
- 页 1
- 页 2
- 书签1586718E O-ring
- 书签AAE6D83E O-ring
- 书签46BA6378 Plastic Core
- 书签54D5B9E6 Ring
- 书签C209E0B0 Core Cover
- 书签C91CEDC6 Pulling Core
- 书签93AC4FEF Sealing Plate
- 书签98E47EAA Washer
- 书签4F8D9F4E Washer
- 书签0517A0CD Spout Assembly
- 书签2485A73F Protective Sleeve
- 书签1A5D758F Screw
- 书签24DCA479 Knob
- 书签E94E72A4 Spout
- 书签796F7DC1 1
- 书签1EDE2747 2
- 书签366F19A3 3
- 书签2D0BDD1E 4
- 书签1EE13FE0 5
- 书签C260C46E 6
- 书签C2D6EB39 7
- 书签F74B3AB0 8
- 书签BA34BBD8 9
- 书签B8DF4D61 10
- 书签E5123FCF 11
- 书签A31BB590 12
- 书签6FACA6B4 13
- 书签BB88CAA6 14
- 书签104F42F4 15
- 书签F48FBAF3 16
- 书签8379DE06 17
- 书签84B53BDC 18
- 书签545E8A85 19
- 书签0B12A2AA 20
- 书签777AAF7D 21
- 书签E113475F 22
- 书签2B685C83 23
- 书签B9E81ED2 24
- 书签A7CAF829 25
- 书签E0A34FA3 26
- 书签EFEBF135 27
- 书签575BE54E 28
- 书签1412D98E 29
- 书签7F69797E 30
- 书签83AA6AC9 31
- 书签87E0CF27 32
- 书签7058E3D8 33
- 书签FDB8642E 34
- 书签699ACD4E 35
- 书签484EE18E 36
- 书签CFB3EDC0 37
- 书签65339402 38
- 书签7D825CC9 39
- 书签6D1246F8 40
- 书签3F5EA2DA 41
- 书签79DC9BF2 42
- 书签62D0D602 43
- 书签03A4EB47 44
- 书签161E1923 45
- 书签C181AE5B 46
- 书签762573B0 Part Name
- 书签4E6C7F1D No.
- 书签0A73685A Shower Arm Flange
- 书签8DF4E2FC Shower Arm
- 书签EC7FAFD2 Shower Head
- 书签BF283906 Screws
- 书签59DFA351 Plaster Guard
- 书签8A61FAF3 Trim Cap
- 书签1FE11A00 Lock Nut
- 书签14003151 Cartridge
- 书签F4D16C57 Cartridge Housing
- 书签098B104E Valve Body
- 书签0F20D7D0 O-rings
- 书签1ABC0B77 Sealing Washer
- 书签96F87684 Stop Valve Core
- 书签C9EB2453 Stop Valve Spring
- 书签448E6033 Adjuster Seat
- 书签13C6BA09 Escutcheon
- 书签0426794A Set Screw
- 书签8CC825C0 O-ring
- 书签4D2607E0 Handle
- 书签AB714A0E Allen Wrench
- 书签EEB178EE Teflon Tape
- 书签9EE25B03 Adjuster
- 书签C49F09B2 O-ring
- 书签7CC946D9 1
- 书签6670032A 2
- 书签4D928CD0 3
- 书签7CBA1AF3 4
- 书签9AE7AB58 5
- 书签0929A8B9 6
- 书签BEA7F34B 7
- 书签7CE6A3C7 8
- 书签47273C89 9
- 书签47C99F26 10
- 书签53F9E356 11
- 书签943E64AA 12
- 书签AAD9C952 13
- 书签6A8138F5 14
- 书签4A3E31BC 15
- 书签8FED4AE3 16
- 书签1C5394F2 17
- 书签8EAEEDF2 18
- 书签97D61AB2 19
- 书签791E9C43 20
- 书签A672ECFF 21
- 书签FD8CC30D 22
- 书签DC6D165F 23
- 书签3ED9ADB6 24
- 书签FCE28993 25
- 书签F5CEF97C 27
- 书签3334BAB4 28
- 书签8472E6D8 29
- 书签954CBC80 30
- 书签B8AE9B77 32
- 书签0041604E 33
- 书签A2E5D353 30
- 书签C451ED91 34
- 书签6FBBC3B9 35
- 书签0F1DB5B1 36
- 书签4AF80084 42
- 书签EA2C6F02 37
- 书签9963274B 22
- 书签CA3A8A5E 38
- 书签E4668F71 39
- 书签C611A625 40
- 书签FB774464 41
- 书签7C12BA55 Escutcheon Gasket
- 书签558E017E Sealing Ring
- 书签1107B005 26
- 书签160FD25A 31
- 书签95C1619A O-ring
- 书签2F8B7D4F Handle Button
- 书签BE4CC4B2 O-rings
- 书签0A4ABB8A Screws
- 书签68B895C9 43
- 书签739E259C 44
- 书签08010223 Stop Valve
- 书签F6CF0AEE End Cap
- 书签8A2B0846 Washer
- 书签AAE9AC2C 45
- 书签448D1697 46
- 页 3
- 书签B09D0298 Step 1-2
- 书签E9C91391 1. Note the minimum/maximum installation dimensions between the shower arm \(#2\), handle \(#23\) and spout \(#26\). Also note, if this is a thin wall mounting, the hole for the valve body \(#11\) must be 3-1/8" high x 5-1/8" long.
- 书签43B55444 2. If this is not a thin wall mounting, the plaster guard \(#6\) may be removed from the valve body \(#11\). Note: Secure the valve body \(#11\) to the support cross board for stability.
- 书签BBC3DC25 6
- 书签C485CC41 11
- 书签0C8A8038 3-1/8" \(80mm\)
- 书签0B6A582E 5-1/8" \(130mm\)
- 书签BECE5681 6" \(152mm\)
- 书签ACE97FE9 6-1/2" \(165mm\)
- 书签1C610C2E 1-1/2"-2-3/16" \(38mm-56mm\)
- 书签A2BFCBB4 4-1/2-14NPT
- 书签9A7527B8 3-11/16" \(94mm\)
- 书签F0B755A7 3-1/8" \(80mm\)
- 书签9B2BE8DF 11/16" \(18mm\)
- 书签DA3FB2A4 78''min to finished floor
- 书签7110BF1F 1/2-14NPT
- 书签949D3F6B Min 8"-Max 12" \(203mm-305mm\)
- 书签215DA217 Recommended 74” \(1880mm\) Minimum From Floor To Showerhead, Or Greater As Desired
- 书签758540A9 2-15/16" \(75mm\)
- 书签C40DE31B 6-3/16" \(158mm\)
- 书签BC331024 6-11/16" \(169mm\)
- 书签40E1166E Floor
- 书签30150BF7 Tub Rim
- 书签CBA57D68 3/8"-3/4
- 书签17CFCE35 4"min-6''max
- 书签AAE76A00 1-1/2 ’’-3"
- 页 4
- 书签AC419F55 11
- 书签7E365311 41
- 书签54E74DC7 Installation Instructions
- 书签A4B90A18 5. Install an elbow at one end of the pipe. Install the other end to the tub spout diverter \(bottom hole of the valve body \(#11\)\). Install a nipple that will extend 1-5/8" - 3-1/8" from the finished wall. Note: Piping from the tub spout diverter \(bottom port of the valve body \(#11\)\) to the tub spout outlet must be either 1/2" nominal copper pipe or 1/2" iron pipe. Do NOT use PEX or PVC for the tub spout drop. Using the incorrect piping will cause leakage behind the wall or improper function of the spout.
- 书签55BEABFF 11
- 书签C0220B19 11
- 书签BA1DE05F 41
- 书签89FCBA91 45
- 书签CD111A3D 46
- 书签BAA1F897 11
- 书签2191C484 41
- 书签150F5219 46
- 书签BA55480A 45
- 书签D41E19DB 4. Apply Teflon tape \(#41\) to all pipe threads. Install an elbow at one end of the pipe. Install the other end to the shower diverter \(top hole of the valve body \(#11\)\). Secure the shower elbow to a 2x4 bracing.
- 书签1D530396 4
- 书签13CD1903 Step 3-5
- 书签51E76061 3. Shower Only: Plug the tub spout diverter \(bottom hole\) of the valve body \(#11\), using the washer \(#46\) and end cap \(#45\). Skip step 5 and 8. Tub Only: Plug the shower diverter \(top hole\) of the valve body \(#11\), using the washer \(#46\) and end cap \(#45\). Skip step 4 and 7. Note: For a watertight connection, wrap Teflon tape \(#41\) around all threads in a clockwise direction.
- 书签5FFE2FF9 Shower Only
- 书签0F87E246 Tub Only
- 页 5
- 书签980515C5 Installation Instructions
- 书签F42018AF 6. Turn on the hot and cold water shut offs and check for leaks. If leaks occur, refer to steps 4 or 5. Turn on the faucet and let the water run for one minute. This will help clear any debris that may have come loose during installation and prevent the system from becoming clogged. Turn off the water. Note: Turn on both the hot and cold water shut offs before turning the faucet on. Not turning on both will cause your cartridge \(#10\) to become pressure locked. If this occurs, see the troubleshooting guide.
- 书签CF695CB7 Step 6-9
- 书签ED19782A 1
- 书签373B0AF4 2
- 书签48B595B1 3
- 书签21113B1F 43
- 书签1F641991 8. Slide the spout assembly \(#42\) over the nipple. Attach the spout assembly \(#42\) to the nipple with screw \(#36\), using Allen wrench \(#40\). See the diagram for a visual. Note: The spout \(#26\) can be screwed directly onto a threaded nipple. If this option is being used, unscrew the plastic core \(#32\). The plastic core \(#32\), ring \(#33\) and screw \(#36\) will not be needed. Measure the spout \(#26\) from the threads to the back of the spout \(#26\) to determine the length of nipple needed. Screw the spout \(#26\) directly onto the nipple.
- 书签42E04AC7 42
- 书签B64BF441 40
- 书签3354DE25 7. Slide the shower arm flange \(#1\) onto the longer end of the shower arm \(#2\). Wrap the threads of the longer end of the shower arm \(#2\) with Teflon tape \(#41\) and install to the shower drop. Wrap the threads in Teflon tape \(#41\). Verify the washer \(#43\) is in place between the shower head \(#3\) and the shower arm \(#2\). Install the shower head \(#3\) onto the shower arm \(#2\).
- 书签02CDE001 9. Remove the protective sleeve \(#5\) from the plaster guard \(#6\) by twisting the protective sleeve \(#5\) counterclockwise.
- 书签74B6167D 5
- 书签77F5F7CC 6
- 书签70AD11BA 36
- 书签080542C8 26
- 书签57B727EF 41
- 页 6
- 书签66BFD918 Then use the set screw \(#22\) to secure the handle \(#23\). Insert the handle button \(#37\). See the diagram for a visual.
- 书签DC791FB3 12. Slide the handle \(#23\) onto the cartridge \(#10\).
- 书签F61ED548 Installation Instructions
- 书签496224F4 10. Temperature Limiting Device: Remove the trim cap \(#7\) and lock nut \(#8\). By default, the temperature limiting device is set to the highest temperature setting \(A\). In order to reduce the temperature, remove the temperature limiting device \(the red cap\) and turn the device clockwise to the desired temperature \(position B or C\). Reinstall the lock nut \(#8\) and trim cap \(#7\).
- 书签BD44BF5D 21
- 书签B586763C 38
- 书签95E30E3E 39
- 书签232B141B 19
- 书签63D547C0 13. Turn on the water and check for leaks. If a leak occurs from shower arm flange \(#1\) or shower arm \(#2\) in the diagram, repeat step 7. If a leak occurs from spout assembly \(#42\), repeat step 8.
- 书签A2C81B05 Step 10-13
- 书签2F3C21E0 20
- 书签15135669 9
- 书签107764AA 11. Verify the escutcheon gasket \(#19\) and sealing ring \(#20\) are attached to the escutcheon \(#21\). Slide the escutcheon \(#21\) over the cartridge housing \(#9\) and secure it with screws \(#39\) and O-rings \(#38\). Note: Do not remove the customer service tag with the model number and phone number. This information will be needed when calling the customer service department.
- 书签56C6582F 23
- 书签982D3271 22
- 书签D7BE217B 37
- 书签B3C4A7E7 10
- 书签671165F3 1
- 书签A1095D55 2
- 书签65AECD27 42
- 页 7
- 书签47916436 Troubleshooting
- 书签1F4B2D95 The lock nut \(#8\) has come loose or the O-ring on the cartridge \(#10\) is dirty or misaligned.
- 书签693B2F95 The rubber valve seat at the base of the pressure balance cartridge \(#10\) is dirty or broken.
- 书签E36CF0E0 The cartridge \(#10\) is dirty, damaged, or pressure locked.
- 书签D01C798F Turn off the water supplies. Turn on the handle \(#23\) to release the pressure, then close the handle \(#23\). Remove the handle button \(#37\), set screw \(#22\), handle \(#23\) and trim cap \(#7\). If the lock nut \(#8\) is loose tighten it. If the lock nut \(#8\) is tight, remove the lock nut \(#8\) and cartridge \(#10\). Verify the O-ring is clean and in proper alignment on the cartridge \(#10\). If the O-ring is dirty rinse it in warm water. Reinstall the O-ring onto the cartridge \(#10\). Reinstall the cartridge \(#10\), lock nut \(#8\), trim cap \(#7\), and handle \(#23\), set screw \(#22\) and handle button \(#37\). Turn the water supplies on.
- 书签B2D8A1DC Turn off the water supplies. Turn on the handle \(#23\) to release the pressure, then close the handle \(#23\). Remove the handle button \(#37\), set screw \(22\), handle \(#23\) and trim cap \(#7\), lock nut \(#8\), and the cartridge \(#10\). Verify the rubber valve seat is damange free, clean, and in proper alignment on the cartridge \(#10\). If the rubber valve seat is damaged replace the cartridge \(#10\). If the rubber valve seat is dirty rinse in warm water. Reinstall the rubber valve seat onto the cartridge \(#10\). Reinstall the cartridge \(#10\), lock nut \(#8\), trim cap \(#7\), handle \(#23\), set screw \(#22\) and handle button \(#37\). Turn the water supplies on.
- 书签6CC44DD7 Turn off the water supplies. Turn on the handle \(#23\) to release the pressure, then close the handle \(#23\). Remove the handle button \(#37\), set screw \(#22\), handle \(#23\), trim cap \(#7\), lock nut \(#8\), and cartridge \(#10\). Inspect the cartridge \(#10\) for dirt and damage. Replace the cartridge \(#10\) if damaged. Shake the cartridge \(#10\) and verify the pressure balance spool \(located at the bottom of the cartridge \(#10\)\) is moving freely \(clicks when shaken\). If the spool is not moving, tap it on your hand until it begins to click. If the cartridge \(#10\) is dirty, soak it in warm white vinegar for 4 hours. Every 30 minutes, while the cartridge \(#10\) is submerged in the vinegar, rotate the stem on and off 10 times. Reinstall the cartridge \(#10\), lock nut \(#8\), trim cap \(#7\), handle \(#23\), set screw \(#22\), and handle button \(#37\). Turn the water supplies on.
- 书签DD009339 Leaks underneath the handle \(#23\).
- 书签99203D27 The water will not shut off completely.
- 书签DED5DD75 The water temperature cannot be adjusted or there is no hot or cold water.
- 书签72C21310 7
- 页 8
- 书签682A214A The manufacturer warrants that the parts and assemblies of this product will be free from defects in material and workmanship under normal household use for as long as it is owned by the original consumer purchaser. This warranty covers the original purchaser with original receipt only and does not include business, commercial or industrial use of this product. This warranty shall not apply to goods which have been subject to accidents, negligence or improper installation. Our responsibility under this warranty is limited only to the replacement of parts and no other costs. Should a malfunction occur within the time covered by this warranty, replacement parts may be obtained from Customer Service Department 1-800-626-3525 or email warranty@cmiproduct.com. The manufacturer will, at its discretion, provide replacement parts for installation by consumer for any parts that prove defective under normal usage and care with new or equivalent parts.
- 书签358D5F80 Revised on 05/15/2020
- 书签AE0FBDA5 8
