Installation Instructions

4: Hang the mirror on the wall matching the screw's position. Figure 4.
5: Measure the distance between two mounting holes. Figure 5.
6: Drill two leveled holes on the wall and insert anchors into drilled holes. Figure 6.
7: Fit the shelf onto the mirror matching the screw's position. Figure 7.
8: The installation is complete. Figure 8.
TROUBLESHOOTING
Problem:
Mirror is higher on one side than
the other.
Possible Cause:
1) Mounting screws are not level.
2) Hanging hardware on the
mirror is not level.
Corrective Action:
1) Remove the mirror from the wall and re-check
the screws; adjust as needed.
2) Measure the position of the hanging hardware
on the back of the mirror and ensure that it is
level, adjust as needed.
Figure 4
Figure 5
Figure 6
Figure 7 Figure 8
B
D
G
F