installation Tools Adjustable Wrench (2) « Teflon Tape + Groove Jo lint Slier « Phillips Screwdriver « Silicone Sealant Maintenance Your new faucet is designed for years of trouble-free performance. Keep It looking new by cleaning It periodically with a soft, damp cloth. Av old abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and void your warranty.
Installation Instructions Installation Instructions 7.8lip 1/2" coupling nuts onto water supply tubes or use flexible stainless steel supply lines (recommended) — both are sold separately. To avoid breaking the @% @ copper tube on the faucet, use two wrenches (as shown) to keep from twisting the supply tube from the faucet when you tighten the nut. Typically the cold water supply is on the right and the hot water supply is on the left. Water Supply Hoses 8.
For Models : 673-6167, 673-6168, 673-6169 Robe Hook Tools + Love + Willpower + 1/4° DBt + 116" Driblet * Masking Tape + Pencil * Hammer * Phillips Screw Driver * Safely Glaser + Stud Finder e | Tirol Your new Bath Accessory Is designed forbears of trouble-free performance. Keep It looking new by cleaning If periodically with a soft cloth. Av old abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and cold your warranty. Need Help Have a question? DON'T GO BACK TO THE STORE.
Installation Instructions Installation Instructions Lifetime Lilted Warranty Figure 2 Wood Wall Stud Installation Front View Sade View Wood wall Step 4b — Wood Wall Stud Installation Drill 1/14" holes in the marked spots, be sure to keep the drill level. Insert anchor will not be needed. Step 5 Dry Wall Installation: Attach the mounting bracket( ) using the mounting screws (7) to the insert anchors (5). See Figure 1 For example.
For Models : 673-6167, 673-6168, 673-6169 Toilet Paper Holder * Level + PawerDrlll + 1/4° DBt + 116" Driblet * Masking Tape * Parlance * Hammer + Phillips Se raw Driver + Safely Glasses * Stud Finder Tools Maintenance Your new Bath Accessory Is designed forbears of trouble-free performance. Keep It looking new by cleaning If periodically with a soft cloth. Av old abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and cold your warranty.
Installation Instructions Lifetime Limited Warranty Body Step 6 A -Position body over mounting brackets (16} and tighten set screws (4. B Position right base (5} over mounting brackets (16) and tighten set screws (6}. The manufacturer warrants that the parts and assemblies of this product well be free from defects In material and workmanship under normal household use for as long as it is owned by the original consumer purchaser.
Installation Instructions Installation Instructions Installation Instructions Installation Instructions Installation Instructions Lifetime Limited Warranty = &P The manufacturer warrants that the parts and assemblies For Models: 673-6167, 673-6168, 673-6169 E l"wWEJ this product will be free from defects In material and 24" Towel Bar — 8 67’\ 8| workmanship under normal household use for as long as iris Step owned by the original consumer purchaser.
Template Position Bracket and Drill Holes as Indicated Front View of Post Level Line Position Bracket and Drill Holes as Indicated 11/16" (18mm) @f\r\ (\fl 24"Towel Bar(610mm) Have a question? DON'T GO BACK TO THE STORE, WE CAN HELP, Just call 1-800-626-3626, 8 a.m. to & p.m. EST Monday-Friday.
For Models : 673-6167, 673-6168, 673-6169 Towel Rin: Tools + Love + Willpower + 1/4° DBt + 116" Driblet * Masking Tape + Pencil * Hammer * Phillips Screw Driver * Safely Glaser + Stud Finder e | Tirol Your new Bath Accessory Is designed forbears of trouble-free performance. Keep It looking new by cleaning If periodically with a soft cloth. Av old abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and cold your warranty. Need Help Have a question? DON'T GO BACK TO THE STORE.
Installation Instructions Installation Instructions Lifetime Lilted Warranty Figure 2 Wood Wall Stud Installation Front View Sade View Wood wall Step 4b — Wood Wall Stud Installation Drill 1/14" holes in the marked spots, be sure to keep the drill level. Insert anchor will not be needed. 7 Step 5 Dry Wall Installation: Attach the mounting using the mounting screws (8) to the insert anchors (9). See Figure 1 For example.
