Tools Needed For Models : 6736243, 6736244 « Adjustable Wrench ) + Groove Joint Puller Q « Screwdriver Silicone Sealant Teflon Tape MORE 6736245 Single Handle Floor Mount Faucet Maintenance Your new faucet Is designed for years of trouble-free performance. Keep It looking new by cleaning It periodically with a soft, damp cloth. Av old abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and cold your warranty.
Parts Diagram / List 714 e 30 +H73 3153 5731 éfig 3.
Preparation/Assembly 1. Shut off the water supplies before installation. 2. Cutahole in the sub floor as shown. Base | Mn Center line ‘ Finished Wall Finished Floor Step 1-2 Have a question? DON'T GO BACK TO THE STORE, WE CAN HELP, Just call 1-800-626-3525 ,8 a.m. to 5 p.m.
Installation Instructions 3. Align the valve (#51) in the correct position based on the dimensions from step 2. Verify the cold supply notch is in the correct position. See the diagram below. Attach the valve (#51) to the support, using valve mounting screws (#50) until snug. Use a level to verify the valve (#51) is level, then tighten the valve mounting screws 4. Remove the tube protector (#52) from the valve Apply Teflon tape to all pipe threads.
Installation Instructions 6. Make sure the valve (#51) is free and clear of dirt and debris. Slide the body (#21) onto the valve (#51) and insert the valve screws (#25) through the mounting plate (#26) into the valve using the large Allen wrench See diagram for visual. Finished Floor 7.
Troubleshooting If you've followed the instructions carefully and your faucet still does not work properly, take these corrective steps. Problem Cause Action Leaks underneath handle. Lock nut {#41) has come loose. Tighten the lock nut water will not shut off completely. Dirty or damaged Remove the handle (#45) and the cartridge Check for dirt and damage. If the cartridge (#40) is dirty. soak it in white vinegar for 4 hours.
