Tools Needed For Models : 6736246, 6736247 6736248 Adjustable Wrench Groove Joint Puller Phillips Screwdriver « Silicone Sealant + Teflon Tape MARIANA Maintenance Single Handle Floor Mount Faucet Your new faucet Is designed for years of trouble-free performance. Keep It looking new by cleaning It periodically with a soft, damp cloth. Av old abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and void your warranty.
Parts Diagram / List co-b 3B——= Part Name 1 Aerator 2 lo-ing 3 | spout 4 noting 5 |Ring 6 | Setscrew 7 |Ring 8 | spout Connector 9 | O-inf 10 | Wearing Ring 11 | Cartridge Body 12 | O-inf 13 | Connector 14_| Restrict or 15 | Body 16 |Base 17_| Hand-Held Shower 18 | Hand-Held Shaker Seat 19 poring 20 | Hose 21 | Diverted 22 | Wearing Ring 23 | Handle Stem 24 | Diverted Handle 25 | Cartridge 26 [ Lock Nut 27 | Tim Cop 28 | Handle Button 29 | Set Screw 30 | Handle 31_| Water supply Tube 32 | O-ring (Red) 33 |
Preparation/Assembly 1. Shut off the water supplies before installation. ‘ Min *—rg‘ Bath i Finished Floor Finished Wall Step 1-2 Have a question? DON'T GO BACK TO THE STORE, WE CAN HELP, just call 1-800-626-3525 ,8 a.m. to 5 p.m.
Installation Instructions 3. Align the valve (#44) in the correct position based on the dimensions from step 2. Verify the cold supply notch is in the correct position. See the diagram below. Attach the valve (#44) to the support, using valve mounting screws (#40) until snug. Use a level to verify the valve (#44) is level, then tighten the valve mounting screws Top View 4. Remove the tube protector (#46) from the valve Apply Teflon tape to all pipe threads.
Installation Instructions 6. Make sure the valve (#44) is free and clear of dirt and debris. Slide the body (#15) onto the valve (#44) and insert the valve screws (#42) through the mounting plate (#43) into the valve using the large Allen wrench See diagram for visual. Finished Floor o 4-34+~ 7. Attach the hose (#20) to the cartridge body (#11) and the hand-held shower 1L 8. Remove the aerator Turn on the hot and cold water for one minute.
Troubleshooting If you've followed the Instructions carefully and your faucet still does not work properly, take these corrective steps. Problem Cause Acton Leaks underneath handle. Lock nut (#26) has come Tighten the lock nut loose. Remove the handle (#30} and the cartridge Check for dirt and damage. If the cartridge (#25) is dirty. . . soak it in white vinegar for 4 hours. Every Water will not shut off completely.
