Installation Instructions

2. Fasten 2 X 4’s to both interior sides of the cabinet using wood screws. Use wood glue for an
extra secure bond.
3. Option 1: Cut a ¾” piece of plywood that will serve as the deck for the sink to rest on. Note:
Make sure you cut holes in the plywood for access to water lines, drain, garbage disposal, etc.
Secure plywood panel to the wood studs fastened to the side of the cabinet in step 2 using
wood glue and wood screws.
Option 2: Attach 2 X 4’s to the wood studs fastened to the cabinet sides in step 2 using wood
glue and wood screws.