' Under-Mount Apron Front MK& fl_\) Farm Sink Installation e ey FOR EXPERIENCED AND PROFESSIONAL INSTALLATION ONLY Disclaimer: This application must use a modified sink base and solid surface counter top material. *BEFORE INSTALLING THE SINK, INSPECT IT FOR DAMAGE. DO NOT INSTALL DAMAGED UNIT. CAUTION; Risk of personal injury. Metal surfaces are sharp and cause severe cuts. Please use gloves and handle sink with care. * [inspect the drain and supply lines; replace if necessary.
Caution: Please Read All Instructions Before Ba ginning The Installation, Before You Begin = Metal edges may be sharp use caution when handling. » For Experienced and Professional Installation only. = Follow all local standards and codes. « For solid surface counter top installations only je; granite, quartz, stonewall. « Custom sink base cabinet is required.
NOTE: The clip may be too long foursome installations. If this is the case, make a brace out of wood or solid material, but tit up against the sink, and on site, screw it into the cabinetwork. Measure the thickness of the brace and thé cabinet wall so the screw does nation though to the other side of the cabinet. Step 4. Locate and drill the mounting holes (following the countertenor manufacturer's instructions). Holes should allow even spacing of mounting brackets around the sink.