Installation Instructions


Bathroom Vanity
Installation
Technical Drawing
Step1. Unpackage the vanity and place the base by your plumbing to be
able to install your faucet and drain. At this point you can level the
cabinet with the leg levelers
Step2.Apply a bead of clear or white silicone sealant evenly along the
top of the cabinet
Step3.Place the vanity top onto the cabinet . Firmly apply pressure to
the vanity top sealing it to the cabinet
Step4. Apply silicone sealant evenly along the bottom of backs plash
and wall
Step5. Finally place the bottom side of backs plash with sealant onto the
vanity top and check the alignment of back splash