Installation Guide

6
TC-950 & TC-950-WPA
July 2017
CHAPTER 1 - BRIEF INTRODUCTION
1.1 BRIEF INTRODUCTION
This series of equipment is the tire changer with fixed column and rocker arm tire changer. It is suitable to
mount, demount and inflate all types of motorcycle tire with tube & tubeless. The operation is easy,
convenient, safety and reliable. It is the necessary equipment for the auto service shop and tire shop.
1.2 TECHNICAL PARAMETER
· Operation Pressure: 8-10 bar (115 - 145 PSI)
· Motor: 110VAC-1PH, 60Hz
· Turntable Speed: 6 RPM
· Noise Level: ＜70dB（A）
1.3 APPLICATION SCOPE
Model
#
Max. Wheel
Diameter
Max. Wheel
Width
Rim Diameter
(Outer Clamping)
Rim Diameter
(Inner Clamp)
TC-950 1250mm (47″) 400mm (15.74″) 12” - 23” 10” - 20”
1.4 ENVIRONMENT REQUIREMENT
· Ambient temperature 0℃～45℃ (32F - 113F)
· Relative humidity 30～95%
Without dust and flammable / explosive gases
· The operation space around the machine will not smaller than the indicated in Fig.1
Fig. 1
If the tire changer is installed outdoors, you must have a protective type shed or cover to protect from
rain and sun. It is prohibited to use near flammable gases！
(
2
8
”
)
(20”)
(
20”
)