Installation Guide

3
Mar 2016
CR-3000
OWNER / USER RESPONSIBILITIES
The Owner/ User:
 Shall establish procedures to periodically maintain, inspect, and care for the Rotator unit
in accordance with the manufactures recommended procedures to ensure its continued
safe operations.
 Shall provide necessary lockout / rag outs of energy sources per ANSI Z244.1-1982
before beginning any lift repairs.
 Shall not modify the Rotator unit in any manner without prior written consent of the
manufacturer.
 Shall insure that lift operators are instructed in the proper and safe use and operation of
the Rotator unit using the manufacturer’s instructions.
SAFETY PROCEDURES
Total Rotator unit capacity is 3000lbs @ 1500lbs per end. Do not exceed maximum
weight capacity.
Prior to working with Rotator unit, walk around and check for any objects that might
interfere with the operation of unit such as: tools, air houses, shop equipment, etc.
These are generic instructions, please keep on mind there are different easy to hook up
the same vehicle. Make sure to properly secure and balance vehicles center of gravity
before
NOTE: There are no set rules when hooking up a vehicle – just make sure there is a strong
enough mounting points.
BASIC INFORMATION & FEATURES
The Car rotator is a restoration rotator that is designed to make restoring any vehicle a
simple and easy task. The Rotator use heavy duty ram jacks at each end with a slow
release mechanism for safe load lowering and also incorporates an extra long power stroke
with hydraulic by pass valves preventing the cylinders from over traveling
The Car Rotator will also lower down to most bumper heights allowing capability to lift the
body of the vehicle to any height.
Whether you’re an owner of a large restoration shop or simply a home hobbyist, the Car
Rotator provides an efficient and affordable way for anyone to restore old classic vehicles.