Installation Guide

TABLE OF CONTENTS
Important Note--------------------------------------------------------------------------------Page 3
Definition---------------------------------------------------------------------------------------Page 4
Preparation and General Information---------------------------------------------------Page 5
Important Concrete and Anchoring Information---
---------
--------------------------Page 6
Installation and Basic Operation Instruction------------------------------------------Page 7
Safety Procedures--------------------------------------------------------------------------Page 11
Maintenance Schedule--------------------------------------------------------------------Page 12
Troubleshooting-----------------------------------------------------------------------------Page 14
Owners Responsibilities------------------------------------------------------------------Page 15
Packing list ----------------------------------------------------------------------------------Page 16
Installation specification (Fig 2)---------------------------------------------------------Page 17
Prepare area (Fig 3)-----------------------------------------------------------------------Page 18
Cable wiring (Fig 20)----------------------------------------------------------------------Page 19
Parts code (Fig 21 )------------------------------------------------------------------------Page 20
IMPORTANT NOTES
● Do not install this lift on any surface other than concrete confirming to minimum specifications.
● Do not install this lift over expansion joints or cracks. Check with building architect.
● Do not install this lift on a second floor with a basement beneath without written authorization from
building architect.
● Do not install this lift outdoors unless special consideration has been made to protect the power
unit from inclemency weather conditions.
● A good level floor is recommended for proper installation and operation. Concrete should be a
minimum of 4” thickness and 3,000 psi tensile strength with steel or fiber mesh reinforcement.
● The lift is intended to raise the entire body of the vehicle. Do not attempt to lift only part of the
vehicle. Improper use of this equipment could result in damage to the lift, yourself or other property.
●
The lift is intended to lift
vehicles o
nly. It is not designed to lift any person or equipment
cont
aining people.
2
REV A-083013