Installation Guide

5
Jun. 2018
M-1000C
OPTIONAL ACCESSORIES INSTALLATION
SIDE EXTENSION SET
• Insert pipes from extension panel package through holes in lift platform. Long pipe
mounts to the front and the short pipe mount to the rear.
• Insert M8 wing bolt provided through holes on the underside platform to secure end of
pipe to platform.
• Mount side extension panels on ends of pipe for each side of platform, with ramp mount
holes to the rear of lift.
• Secure side extension panels to pipe extensions using the provided ring clips.
• Secure side extension ramps to the center ramp with nuts & bolts provided. Ensure
ramp holes are positioned towards the center ramp.
• Install stabilization bar by removing the cap at one end, then insert bar through square
hole in base of scissor mechanism. Secure with nut & bolt hardware and reinstall cap.
SIDE EXTENSION SET
(INSTALLATION DIAGRAM & PARTS LIST)
CYCLE VISE
(NOTE: INSTALLATION INFORMATION LOCATED INSIDE VICE PACKAGING)
PARTS LIST