Air / Hydraulic High Rise Motorcycle Lift Bench M-1500C-HR Capacity 1,500lbs Installation, Operation & Maintenance Manual WARNING: READ INSTRUCTIONS BEFORE OPERATING
SPECIFICATIONS Model Capacity Operating Pressure Lowered Height Raised Height Platform w/ Side Extensions Platform Only Ship Weight M-1500C-HR 1500 lbs. (680Kg) 90-125 PSI 6-3/4” 38-1/2” 88-1/2”L x 50”W 88-1/2”L x 31-1/2”W 765 lbs. FEATURES · · · · · · · · · 1,500 lbs.
LIFT IS RECOMMENDED FOR INDOOR USE ONLY. UNPACKING AND SET-UP 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Open the crate, then remove items on top of lift. Carefully remove lift from crate. Connect hydraulic hose from the cylinder to the air-hydraulic pump. Connect the compressed air (90-125 psi) supply to the air-hydraulic pump. Press the ‘Pressure’ pedal side of the air-hydraulic pump to raise up lift. Mount front wheel vise and then tighten all the bolts and nuts.
MAINTENANCE · All moving parts have been lubricated at the factory and should be re-lubricated every (6) months to prevent premature pivot shaft defects. · Pivot shaft set screws should be checked frequently to be sure they are tight. (These are located at the top end of the inside frame assembly.) WARNINGS v v v v v Always keep safety latch bar in position, except when lowering. Keep hands and tools away from underside of platform. Do not ride vehicle onto lift.
EXPLODED VIEW 5 Jan 2020 M-1500C-HR
PARTS LIST ITEM Tux P/N 1 M-1500CHR-001 1-1 M-1500CHR-001.1 2 M-1500CHR-002 3 M-1500CHR-003 5 M-1500CHR-005 6 M-1500CHR-006 7 M-1500CHR-007 8 M-1500CHR-008 9 M-1500CHR-009 10 M-1500CHR-010 11 M-1500CHR-011 12 M-1500CHR-012 13 M-1500CHR-013 14 M-1500CHR-014 15 M-1500CHR-015 18 M-1500CHR-018 19 M-1500CHR-019 20 M-1500CHR-020 21 M-1500CHR-021 22 M-1500CHR-022 23-1 M-1500CHR-023.
48 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 M-1500CHR-048 M-1500CHR-050 M-1500CHR-051 M-1500CHR-052 M-1500CHR-053 M-1500CHR-054 M-1500CHR-055 M-1500CHR-056 M-1500CHR-057 M-1500CHR-058 M-1500CHR-059 M-1500CHR-060 M-1500CHR-061 M-1500CHR-062 M-1500CHR-063 M-1500CHR-064 M-1500CHR-065 M-1500CHR-066 M-1500CHR-067 JP17-04100-000 Cylinder Body 5308-00140-000 Copper Washer JP08-04001-000 Union Connector JP17-04004-000 Plate QY02-02101-000 Spring JP17-04005-000 Throttle Valve JP17-00012-000 Extension
LIMITED WARRANTY Structural Warranty: The following parts and structural components carry a five-year warranty: Columns Tracks Arms Cross Rails Uprights Top Rail Beam Swivel Pins Legs Carriages Overhead Beam Limited One-Year Warranty: Tuxedo Distributors, LLC offers a limited one-year warranty to the original purchaser of Lifts and Wheel Service equipment in the United States and Canada.
