Installation Guide

3
SJ-35
May 2017
DESCRIPTION
This SJ-35 jack is a hand pump operated, scissor style sliding bridge jack, designed to be
mounted on the four-post lift’s runway edges between runways. It is capable of lifting the
wheels off runways to provide ‘wheels free’ service for brake, suspension, tire repairs and
maintenance.
FEATURES
A. Lifting capacity of the sliding jack is 3500 lbs. (1600 kg).
B. The sliding body assembly arms are adjustable for an inside runway width of 30" (762 mm)
minimum to a 45.7” (1162 mm) maximum. (Fig.1)
E. The SJ-35 Sliding Jack is equipped (1) pair of contact pad adaptors with rubber pad inserts
and two (2) different sizes of stackable height adaptors at 1.5” & 5”.
F. The SJ-35 Sliding Jack is equipped with a locking latch assembly that will lock at full-rise
and other two positions that is released by actuating the lock release lever.
H. The SJ-35 Sliding Jack is maneuvered on the heavy duty nylon pads. Actual vehicle load
is transferred to jack’s end sections via the sliding body load bars, positioned on the top /
inside edge of the runways.
Fig. 2
height adaptor
storage bracket
contact pads &
height adaptors
5” & 1.5”
slider body
assembly