Installation Guide

TC-950 & TC-950-WPA

July 2017

3.2.6 If being equipped with the tool box, you must fix firmly and the column completely installed.

3.3 AFRL - AIR FILTER, REGULATOR & LUBRICATOR INSTALLATION:

Note: The AFRL has been detached and placed in the accessory box. The AFRL assembly will be installed

at the customer’s location during installation. This is done to prevent damages during shipment.

3.3.1 Remove the AFRL and mounting screw from the accessory box. Remove any oil or dust. Use the

screw to mount the AFRL to the right side of the body (Fig. 12).

3.3.2 To connect air hose: Detach the adapter on the ø8 hose on the side wall of the body and insert it

into the elbow fitting (Figs.13 &14). The adapter is to keep the hose from sliding into the body.

3.3.3 To connect the inflation gun or inflation gauge box: Inlay the adapter of the inflation gun or inflation

gauge box into the groove (Fig. 15) on the open nut of the air regulator fitting. Tighten nut to connect the

air regulator.

Fig. 11

Fig. 12

Fig. 13

Fig. 14

Fig. 15