Installation Guide

6
TP11KC-DX
Jun 2017
2. Technical Manual
2.1 Product Description
The TP11KC-DX (165948T) 2-post hydraulic lift is a surface mounted, frame contact lift incorporating the latest safety
technologies. Designed and manufactured for a lifting capacity of 11,000 lbs. (Max 2,750 lbs. per Lifting Arm) and is fully
capable for lifting vehicles, vans and light trucks by safely holding them in an elevated position. The TP11KC-DX also
incorporates the Bi-Symmetric feature, which allows the Arms to be configured for both asymmetrical & symmetrical
lifting configurations.
The TP11KC-DX 2-post hydraulic lift consists of
a fixed structural unit (Crossbeam and
Columns), the mobile units (Carriages and Lift
Arms), and the Hydraulic Power System and
Safety devices.
A. Crossbeam
B. Column
C. Carriage
D. Lifting Arm
E. Power Unit
F. Overhead Safety Shut-Off Bar
G. Single Point Safety-Latch Release
2.2 Technical Data
Capacity
11,000 lbs. (Max 2,750 lbs. per Arm)
Height Overall
144”
Width Overall
w/ Power Unit
145-1/2”
Max
Lifting Height
71”
Max Lifting Height w/ Tallest Adaptor
76-1/2”
Width
Between Columns
116”
Min Pad Height
4”
Drive Thru Clearance
104”
Front Arm Reach
–
Min / Max
23” – 45”
Rear Arm Reach
–
Min / Max
41” – 57”
Power
220V, 20 Amp, 1 Phase