Instruction manual

1.0 INTRODUCTION

Thanks for purchasing this 1T-AP-216 Analog to Digital Audio Converter from TV

One. The 1T-AP-216 is designed to convert standard R/L analog audio to a

digital audio stream and output the information in Coaxial and Optical formats

simultaneously plus allow the insertion of 150ms of delay if necessary to insure

lip sync. Our professional video conversion products have been serving the

industry for over twenty years. TV One offers a full line of high quality Seamless

Switchers, Video Scalers, Up/Down/Cross Converters, Analog-Digital Converters

(SD/HD-SDI, HDMI, DVI), Format Converters, Standards Converters,

TBC/Frame Synchronizers, Matrix Routing Switchers, Signal Distribution

Amplifiers and Cat.5 Transmission Systems.

1.1 Liability Statement

Every effort has been made to ensure that this product is free of errors. TV One

cannot be held liable for the use of this hardware or any direct or indirect

consequential damages arising from its use. It is the responsibility of the user of

the hardware to check that it is suitable for his/her requirements and that it is

reproduced or transmitted by any form or means electronic or mechanical,

including photocopying, recording or by any information storage or retrieval

system without the written consent of the publisher.

TV One reserves the right to revise any of its hardware and software following its

policy to modify and/or improve its products where necessary or desirable. This

statement does not affect the legal rights of the user in any way.

All third party trademarks and copyrights are recognised. The TV One logo, TV

One-task and CORIO are the registered Trademarks of TV One. All other

trademarks are the property of their respective holders.

1.2 Features

The 1T-AP-216 Analog to Digital Audio Converter has many features that enable

it to perform in a superior manner. Among those features you will find:

 Supports R/L input and Coaxial/Optical output simultaneously

 Supports output sampling frequencies at 48kHz

 Supports 150ms audio delay

 Optical Fiber cable runs of up to 5 meters (16 feet)

 Immune to electromagnetic noise

 Easy to install and simple to operate