Instruction manual

5
4.0 CONNECTING THE HARDWARE
Connect the HDMI Video Source to the input of the 1T-DA-652 HDMI Distribution
Amplifier, connect its outputs to HDMI Compliant devices or monitors and lastly connect
the AC to DC Power Adapter. The drawing below shows the locations of the input,
outputs and power connector.
1T-DA-652 1x2 DVI DA
4.1 Connecting the Input to the Distribution Amplifier
You can connect any HDMI compliant device’s output to the 1T-DA-652’s HDMI input.
Make certain that the HDMI cable is securely plugged into the source device as well as
the HDMI Distribution Amplifier. Always use a high quality cable, as short a length as
possible, for best results.
4.2 Connecting the Outputs to the Destination Devices
Using a high quality HDMI cable, connect each output of the 1T-DA-652 HDMI DA to an
HDMI compliant device. Use the shortest cable run possible.
4.3 Connecting Power
The 1T-DA-652 HDMI DA is shipped with a Power Adapter to convert
100~240VAC@50-60Hz to 5VDC. Connect the DC Output Cable from the Power
Adapter to the unit and then plug the Power Adapter into an AC Receptacle. There is no
power switch. The unit begins to function as soon as it is plugged into AC.