Instruction manual

5
If you are using the RS-232 control function, connect the RS-232 cable at this time.
Turn the input and destination equipment on and then turn on the 1T-MX-3344 Matrix
Switcher.
5.0 OPERATING THE UNIT
The 1T-MX-3344 is a special type of Video/Audio switcher called a Matrix Routing
Switcher. A Matrix Switcher allows any input to be routed to any (or all) outputs whereas
a regular routing switcher only allows the operator to select an input that will be sent to
one, dedicated output.
The 1T-MX-3344 can be controlled via any of three (3) methods: From the front panel,
by use of the included Infrared Remote Controller, or via the RS-232 functionality.
If you have not done so already, press the Power Switch and observe that the Power
“On” LED illuminates. If it does not, make certain that the AC adapter is plugged in to
both the unit and the AC socket and that appropriate AC voltage is available at the
socket.
5.1 Control via the Front Panel Switches
Decide on an output (1 through 4) and repeatedly press the small button associated
with that output as shown in the example above to select the input. LEDs will illuminate
as you step through the possible inputs, showing the input number you have selected
and, when you arrive at the input you wish to associate with the selected output, merely
stop pressing the button.
Using this method, you can make any of the inputs appear on any of the outputs or you
can make the same input appear on all or some of the outputs. Decide the input you
wish to associate with an output and press the appropriate output button until the input
signal you want appears on that output.