Instruction manual

8
5.1.4 Output Adjustments When in DVI-D Mode:
Picture Adjust - When the Picture Adjust Menu is selected, the following adjust
parameters will appear on the OSD:
Contrast 070
Bright 130
Color 070
Red 128
Green 128
Blue 128
Reset
Exit
Use the +and – buttons to choose the desired parameter, press Menu to select and then
use + or – to increase or decrease the value. Press Menu to save the value. When
finished with all adjustments, use the + and – buttons to move to Exit and then press
Menu to actually exit the routine.
5.1.5 Menu Ranges and Defaults
The adjustment range and factory preset value as follows:
Value Range Default
Contrast
Bright
Color
Red
Green
Blue
0~255
0~255
0~255
0~255
0~255
0~255
047
102
064
128
128
128
Note: Select reset to reset all adjustment back to the factory preset value.
HV adjust- When selected, the following sub-menu appears.
H-position, V-position
Use the + and – buttons to adjust the best horizontal and vertical position of the
picture.