Instruction manual

OSD adjust- When this mode is selected, you can adjust the Horizontal and

Vertical position of the OSD menu.

System information- When selected, this shows the input/output resolutions

and their vertical refresh rate on the screen.

Auto adjust- When selected, the T1-VGA-DVI will automatically adjust all the

parameters to the factory presets.

Exit- Select to exit from the current menu page.

Notes: The default output resolution of the T1-VGA-DVI is XGA@60 Hz. The

unit has non-volatile memory and memorizes all your setting before power off

and recalls those setting on next power on however changing output resolution

erases all settings. At any time, pressing + and - buttons simultaneously will

reset the output resolution to XGA@60Hz, and other settings back to factory

default values.

6.0 TROUBLESHOOTING

Other than checking for faulty cables, the only common problem would be choosing a

wrong Output Setting. Make sure the display is capable of handling the resolution and

refresh rate selected and make sure the output format selected (RGB or YPbPr) for the

type of cable being used at the output.

After trying the above suggestions should the problem still persist, contact your dealer

for additional suggestions before contacting TV One. Should the dealer’s technical

personnel be unable to assist you, contact TV One via our support website:

http://tvone.crmdesk.com. Create a technical support request on the site and our

support team will respond within a short period of time.

7.0 LIMITED WARRANTY

TV One warrants the original purchaser that the equipment it manufactures or sells will

be free from defects in materials and workmanship for a fixed term from the date of

purchase. The warranty term for specific product lines is defined below.

1. TV One branded products based on TV One’s CORIO technology are warranted for

a period of five years from the date of purchase. This includes products with the

model number prefix of C2, 1T-C2, CX, A2 or S2.

2. TV One-task branded products, other than those based on TV One’s CORIO

technology mentioned above, are warranted for a period of three years from the date

of purchase. This includes products with the model number prefix of 1T, with the

exception of 1T-C2.