Instruction manual

5
3.0 CHECKING PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make certain the
following items are contained in the shipping carton:
 1x 1T-VGA-DVI Scaler
 1x 100-240VAC AC/DC Power Adapter
 1x User Manual
Note: Please retain the original packing material should the need ever arise to return the
unit. If you find any items are missing, contact your reseller or TV One immediately.
Have the Model Number, Serial Number and Invoice available for reference when you
call.
4.0 CONNECTING THE HARDWARE
The first step is to connect a video source to the input of the Scaler and to connect its
output to a display device. Below you’ll find drawings of the unit showing the locations
of the input, output and power connectors.
4.1 Connecting the Input
The 1T-VGA-DVI can accept both PC and HDTV analog inputs. The 1T-VGA-DVI will
automatically detect the mode and resolution of the PC/HDTV input.
4.2 Connecting the Output
The 1T-VGA-DVI Video Scaler can output a wide variety of PC and HDTV resolutions.
To use the device with a DVI capable monitor or display, connect the DVI cable to the
unit’s DVI output connector then to the device’s DVI input connector. Select DVI-D from
the OSD menu. This is the standard configuration for the device. The 1T-VGA-DVI has
an analog output mode that can be used to feed an analog monitor.
Note: Proper signal levels are very important to the operation of this product so make
sure your inputs are of the levels specified on page 5. If improper operation of the unit
occurs and the unit has power, the most likely cause of the problem is high or low signal
levels, use of a low quality cable or the use of a wrong input cable.