Specifications

C2-1000 SERIES OPERATION MANUAL

There are 2 ways to create a resolution using this tool. The easiest, shown on the

New resolution tab at the side, allows you to create a new resolution using the

minimum information of Horizontal and Vertical size and the desired refresh rate. It’s

also possible to constrain the Vertical size of the resolution by selecting a custom,

4:3 or 16/9 aspect ratio and then left clicking your mouse on the Vertical Resolution

box which will then automatically calculate the Vertical Resolution for the given

Horizontal Resolution and Aspect Ratio.

Once you have entered the required information it’s simply a matter of pressing the

‘Create’ button. The resolutions are created using one of two VESA

standards,

Coordinated Video Timings (CVT) or Generalized Timing Formula (GTF) in order to

make the created resolutions as compatible as possible with standard video

equipment. If you find your created resolution does not work effectively try the

calculation using GTF.

Once you press the Create, you’re asked if you want to add this new entry to the

resolution table. If you select No, the resolution can only be added to the table using

the Advanced Create and edit screen.

Once the new resolution is created the ‘Scaler menu values’ frame will show what

the unit’s on-screen values would be if you were in the ‘Adjust Image Parameters’

screen.

Figure 15 Resolution editor - Unit on screen values

If the resolution was added to the resolution table, then the table at the bottom of the

screen will update and show the newly created resolution and all its timing

parameters. New resolutions are named using the resolution H and V size; refresh

rate and the letter U to signify a user created resolution. Using the Timings tab you

can alter this text.