Specifications

C2-1000 SERIES OPERATION MANUAL

If you select ‘Cut’ or ‘Fade’, the only remaining menu items will be ‘Switching Fade

Time’ and ‘Exit’. Selecting ‘Wipe’ or ‘Push’ exposes additional parameters.

This parameter controls how long a transition from one input to another takes. The

value can be 0 (a cut) or several minutes - adjustable in 1/10

second increments.

If you selected ‘Wipe’ or ‘Push’ for the transition type, then you will be able to specify

the ‘movement direction’ of the transition that you want. Both ‘Wipe’ and ‘Push’

support: Left to Right, Right to Left, Up/Down (Top to Bottom), Down/Up (Bottom to

Top). ‘Wipe’ also supports: Diagonal and Diamond effect.

Wipe Size sets the ‘granularity’ of the ‘Wipe’ effect and so is only shown when ‘Wipe’

is the transition type. The smaller the number, the more elements there are to the

wipe. To clarify by example, if you select the Diamond wipe effect and set a small

number into the Wipe Size parameter, you will have a large number of Diamonds

present in the transition. On the other hand, a large number loaded into the

parameter will result in only one or two diamonds being present during the transition.

8.8 Items associated with the Adjust resolutions group

The Adjust Resolutions Menu Group only appears when the

Advanced Menus function is turned on within the System Menu

Group. To turn it on, go to the System Menu Group and then

proceed to the item that says “Advanced Menus”. Turn the

function ‘On”, exit the Systems menu and return to this menu structure.

The Resolution Database is used by your unit to identify any incoming video signal

and is also used to create an output resolution. It is therefore a very important part of

the unit’s infrastructure.

Important Cautionary Information

DO NOT ADJUST THESE ITEMS UNLESS YOU’RE CERTAIN YOU KNOW WHAT

YOU’RE DOING! THE ONLY METHOD TO UNDO CERTAIN CHANGES IS TO

UPDATE THE FIRMWARE.

TRY USING THE AUTOSET, SHRINK, SHRINK POS, TL & BR ADJUSTMENTS

FIRST.

Adjust transitions

Switching fade time [ .5]

Adjust transitions

Wipe type [Left -> Right]

just transitions

Wipe size [100]