Specifications

C2-1000 SERIES OPERATION MANUAL

Erase Preset 4 280194

Erase Preset 5 280195

Erase Preset 6 280196

Erase Preset 7 280197

Erase Preset 8 280198

Erase Preset 9 280199

Erase Preset 10 28019A

Set output to BLACK 00029B

Set output to WHITE 00029C

Toggle edge blend lines on/off 00029D

Cycle scaler inputs 0002A3

I.e. insert the 6 digit code from above into the following text string:

F041041024F######??<CR>

E.g. to Load Preset 1, use the text string:

F041041024F000291??<CR>

10.5.5 Reset command

This is a special command to reset a unit (as if power had been removed and re-

applied). Note that unlike the above commands, this is sent as binary (i.e. not as

ASCII text).

0x53, 0x06, 0x04, 0x01, 0x55, 0xAA, 0x55, 0xB2

E.g. In Visual Basic, send the string:

Chr$(&H53) + Chr$(&H6) + Chr$(&H4) + Chr$(&H1) + Chr$(&H55) + Chr$(&HAA) +

Chr$(&H55) + Chr$(&HB2)