Specifications

C2-1000 SERIES OPERATION MANUAL
90
In the Ethernet section be sure to set the IP address to the same as the address you
have set on the unit (units Ethernet menu). The port number used should also
reflect the port number on the unit.
If there are multiple units on the network then this port number should be the same
for all units, only the IP address must be unique.
12.2 Connecting to a unit
This main screen allows you to operate the application in one of two modes, firstly
“Demo” mode which allows you to familiarize yourself with the unit control without
having a unit connected. To use demo mode select the product to demo from the
dropdown box and then press Demo mode.
Figure 3 Main screen
Secondly “Connect” mode which connects to a device that you have attached via
Ethernet or Serial. On pressing the Connect button, the software will detect the unit
connected and show the appropriate controls and features.