Operation Manual

First Time Installation

[By Service ID] - Sort the channels according to the station.

[By ONID] - Sort the channels according to ONID.

(d) LCN (Logical channel number)

Set LCN on or off.

(2). Picture Setting

To access the Menu, press MENU then select [Picture] using the RIGHT/LEFT key. The Menu

provides options to adjust the video settings. Press UP/DOWN to select an option and press

RIGHT/LEFT to adjust that setting. Press EXIT to exit the menu.

(b) Resolution

You can change this setting if the picture resolution does not appear to be correct. This setting is

to match the most common setting for HDMI.

[480P]: for NTSC TV system.

[480i]: for NTSC TV system

[576P]: for PAL TV system.

[576i]: for PAL TV system.

[720P]: for NTSC or PAL TV system.

[1080I]: for NTSC or PAL TV system.

[1080P(50HZ)]: for NTSC or PAL TV system.

[1080P(60HZ)]: for NTSC system.

If the picture does not appear to be correct you can change this setting.

This should match the most common setting for TVs in your country.

[NTSC]: for NTSC system TV.

[PAL]: for PAL system TV.

(d) Video Output

Change the video output. [CVBS], [RGB]

(

a) Aspect Ratio

Change the aspect ratio of Video. [Auto], [16:9 PillarBox], [16:9 Pan&Scan], [4:3 LetterBox],

[4:3 Pan&Scan] , [4:3 Full], [16:9 WideScreen]