Instructions / Assembly

30mm

1 1/5"

# 94073

76719 -50

Place the furniture against a wall of your choice. On the insides of left panel

FK and right panel HJ, indentify the slots as illustrated. Based on the slots'

locations and the side panels, create marks on your wall with a pen.

Move the furniture away from the wall. From the marks, measure straight

inwards, respective to the furniture, by 30mm or 1.1/5" and create a dot.

Through this dot, attach the tip-over restraint to your wall. Based on your

type of wall, please contact a hardware store to purchase the correct type of

fitting(s) to use on your wall.

Move the furniture back to the wall again. Next, pass the tip-over restraint

strips through the holes in left panel FK and right panel HJ going from the

wall to the inside of the furniture. From the inside of the furniture, press the

strips against the insides of the side panels and insert the dedicated screws

as illustrated. The tip-over restraints have now been properly installed.