User's Manual

① Go to ConfigNetworkPort menu to set the port number.

② Go to Config NetworkTCP/IPPPPoE Config menu. Enable PPPoE and then enter

the user name and password which you can get from your internet service provider.

③ Go to Config NetworkDDNS menu. Before you configure the DDNS, please apply

for a domain name first. Please refer to DDNS configuration for detail information.

④ Open the IE browser and enter the domain name and http port to access.

 Access through static IP

Network connection

The setting steps are as follow:

① Go to ConfigNetworkPort menu to set the port number.

② Go to Config NetworkTCP/IP menu to set the IP address. Check “Use the following

IP address” and then enter the static IP address and other parameters.

③ Open the IE browser and enter its WAN IP and http port to access.