User's Manual

1. Check “Enable” and then click “Draw Area” button.

2. Drag the mouse to set the ROI area.

3. Set the level.

4. Click “Save” button to save the settings.

4.3 Alarm Configuration

4.3.1 Motion Detection

Go to AlarmMotion Detection to set motion detection alarm.

1. Check “Enable” check box to activate motion based alarms. If unchecked, the camera will

not send out any signals to trigger motion-based recording to the NVR or CMS, even if there

is motion in the video.

Alarm Out: If selected, this would trigger an external relay output that is connected to the

camera on detecting a motion based alarm.