User's Manual

38
Go to ConfigNetworkUPnP. Enable UPNP and then enter UPnP name.
4.5.9 Email
If you need to trigger Email when an alarm happens or IP address is changed, please set the
Email here first.
Go to ConfigNetwork Email.
Sender Address: sender’s e-mail address.
User name and password: sender’s user name and password.
Server Address: The SMTP IP address or host name.
Select the secure connection type at the “Secure Connection” pull-down list according to
what’s required.
SMTP Port: The SMTP port.
Send Interval(S): The time interval of sending email. For example, if it is set to 60 seconds