User's Manual

9
Face Recognition &Access Control Terminal User Manual
After that, select “Obtain an IP address automatically” or manually enter the IP address by
clicking “Use the following IP address”. Then click “Save” to save the settings.
④ Pull the network cable out of the camera.
⑤ Run the IP-Tool and find the camera through IP address or MAC address. Then double
click it listed in the IP-Tool or enter the IP address of the camera in the address bar of the web
browser to access the camera.
2.3 APP Connection
 In LAN
① Enable Wi-Fi function of your phone, then open your phone’s APP store and search
“Superlive Plus”.
② Install this APP in your phone.
③ Make sure your camera and phone are in the same local network.