User's Manual

20
Face Recognition &Access Control Terminal User Manual
Select the voice you want to replace and then click “browse” to select the desired audio file.
After that, click “Upload” to upload the audio file. Rename the audio as needed.
After your own voice prompt is uploaded, you can select it from the audio list and click
“Listen” to listen to your voice prompt.
5.2 Door Lock Settings
Click ConfigAccess ControlDoor Lock to go to the following interface. After the access
control device is connected to the terminal, you can set unlocking mode in this interface.
Unlocking Group: Allow list, visitor (including allow list), stranger (including visitor and
allow list).
Unlocking Delay Time: Set the door unlocking delay time. The time range is from 0 to 10
seconds. For example, the unlocking mode is “Face only” and the delay time is set to “2”
seconds; the door will be opened 2 seconds later after face recognition.
Unlocking Duration: If the door has been unlocked for a period that exceeds the duration, the
door will be automatically locked. The time range is from 0 to 10 seconds. For example, the
unlocking mode is “Face only” and the duration is set to “3” seconds; the unlocking door will
be automatically locked 3 seconds later.
The way to set the unlocking mode:
You can set the unlocking mode when adding a user.