User's Manual

Face Recognition &Access Control Terminal User Manual

Audio Encoding: G711A and G711U are selectable.

Audio Type: MIC.

6.2.3 OSD Configuration

Go to ImageOSD interface as shown below.

Set time stamp, device name, OSD content and picture overlap here. After enabling the

corresponding display and entering the content, drag them to change their position. Then click

the “Save” button to save the settings.

Picture Overlap Settings:

Check “OSD Content1”, choose “Picture Overlay” and click “Browse” to select the overlap

picture. Then click “Upload” to upload the overlap picture. The pixel of the image shall not

exceed 200*200, or it cannot be uploaded.

6.2.4 White Light Control

Click ConfigImageWhite Light Control to go to the following interface.