User's Manual

Face Recognition &Access Control Terminal User Manual

PPPoE and then enter the user name and password from your ISP.

Either method of network connection can be used. If PPPoE is used to connect internet, the

camera will get a dynamic WAN IP address. This IP address will change frequently. To be

notified, the IP change notification function can be used.

Click “IP Change Notification Config” to go to the interface as shown below.

Trigger Email: when the IP address of the device is changed, the new IP address will be sent

to the email address that has been set up.

Trigger FTP: when the IP address of the device is changed, the new IP address will be sent to

FTP server that has been set up.

6.4.2 Wi-Fi Settings

Go to ConfigNetworkWIFI interface as shown below.

1. Checkmark “Enable” to enable Wi-Fi.

Click “Search” to refresh the online wireless devices.