User's Manual
Table Of Contents
- Introduction
- Network Connection
- Face Recognition Configuration
- Live View
- Access Control Settings
- Other Configurations
- Search
- Face Match Result Search
- Appendix
- Appendix 1 Troubleshooting
- Appendix 2 Specifications
7
Face Recognition &Access Control Terminal User Manual
Router Setup
④ Open the IE browser and enter its WAN IP and http port to access. (for example, if the http
port is changed to 81, please enter “192.198.1.201:81” in the address bar of web browser to
access).
Access through PPPoE dial-up
Network connection
Access the camera through PPPoE auto dial-up. The setting steps are as follow:
① Go to ConfigNetworkPort menu to set the port number.
② Go to Config NetworkTCP/IPPPPoE Config menu. Enable PPPoE and then enter
the user name and password from your internet service provider.
③ Go to Config NetworkDDNS menu. Before configuring the DDNS, please apply for a
domain name first. Please refer to DDNS configuration for detail information.
④ Open the IE browser and enter the domain name and http port to access.