User's Manual
Table Of Contents
- Introduction
- Network Connection
- Face Recognition Configuration
- Live View
- Access Control Settings
- Other Configurations
- Search
- Face Match Result Search
- Appendix
- Appendix 1 Troubleshooting
- Appendix 2 Specifications
18
Face Recognition &Access Control Terminal User Manual
5 Access Control Settings
Here we take the access control settings of Web client for example.
5.1 Access Control System Settings
Click ConfigAccess ControlAccess Control System Settings to go to the following
interface.
Select Language: Select the screen display language on the panel/tablet.
Select Voice: Select the language of the voice prompt or the custom voice prompt.
Screen Sleep Time: Set how long the screen display will turn off after no person appears. The
default time is 30s. Please set it as needed. In a sleep state, once a person is detected by the
panel, it will be aroused immediately.
Volu me: Set the volume of the voice prompt.
Screen Brightness: Set the brightness of the screen of the terminal (panel/tablet). The
adjustable range is from 150 to 255.
Customizing Voice
If you are dissatisfied with the default voice prompt, you can customize your own voice
prompt. In the above interface, click “Custom Voice” tab to go to the following interface.