User's Manual

28
Face Recognition &Access Control Terminal User Manual
White Light Mode: “OFF”, “Manual” or “Auto” is optional. In low illumination condition,
this mode can be enabled.
Auto: The white light will be automatically enabled when collecting a face in low
illumination condition. If the auto mode is selected, the duration time should be set for saving
energy. For example, the white light is on and the duration time is set to “2 minutes”; if no
face appears in the detection area after 2 minutes, the white light will be turned off
automatically.
Manual: Select this mode and click “Save”. The white light will be turned on. In this mode,
you can also set the brightness of white light as needed.
6.3 Alarm Configuration
6.3.1 Exception Detection
This function can detect changes in the surveillance environment affected by the external
factors.
To set exception detection:
Go to ConfigAlarmException interface as shown below.