User's Manual
Table Of Contents
- Introduction
- Network Connection
- Face Recognition Configuration
- Live View
- Access Control Settings
- Other Configurations
- Search
- Face Match Result Search
- Appendix
- Appendix 1 Troubleshooting
- Appendix 2 Specifications
30
Face Recognition &Access Control Terminal User Manual
6.3.3 Cable Disconnection
1. Go to ConfigAlarmExceptionCable Disconnected as shown below.
2. Click “Enable” and set the alarm holding time.
3. Trigger alarm out. When the camera is disconnected, the system will trigger the alarm out.
6.3.4 Alarm In
To set sensor alarm (alarm in):
Go to ConfigAlarmAlarm In interface as shown below.
1. Click “Enable” and set the alarm type, alarm holding time and sensor name.
2. Set alarm trigger options.
3. Click “Save” button to save the settings.
4. Set the schedule of the sensor alarm.