User's Manual
Table Of Contents
- Introduction
- Network Connection
- Face Recognition Configuration
- Live View
- Access Control Settings
- Other Configurations
- Search
- Face Match Result Search
- Appendix
- Appendix 1 Troubleshooting
- Appendix 2 Specifications
32
Face Recognition &Access Control Terminal User Manual
Alarm Out Mode: Alarm linkage, manual operation and timing are optional.
Alarm Linkage: Having selected this mode, select alarm out name, alarm holding time at the
“Alarm Holding Time” pull down list box and alarm type.
Manual Operation: Having selected this mode, select the alarm type and click “Open” to
trigger the alarm out immediately; click “Close” to stop alarm.
Timing: Select the alarm type. Then click “Add” and drag the mouse on the timeline to set
the schedule of alarm out; click “Erase” and drag the mouse on the timeline to erase the set
time schedule. After this schedule is saved, the alarm out will be triggered in the specified
time.
6.4 Network Configuration
6.4.1 TCP/IP
Go to ConfigNetworkTCP/IP interface as shown below. There are two ways for
network connection.