User's Manual
Table Of Contents
- Introduction
- Network Connection
- Face Recognition Configuration
- Live View
- Access Control Settings
- Other Configurations
- Search
- Face Match Result Search
- Appendix
- Appendix 1 Troubleshooting
- Appendix 2 Specifications
39
Face Recognition &Access Control Terminal User Manual
There is a certificate installed by default as shown above. Enable this function and save it.
Then the camera can be accessed by entering https://IP: https port via the web browser (eg.
https://192.168.226.201:443).
A private certificate can be created if users don’t want to use the default one. Click “Delete”
to cancel the default certificate. Then the following interface will be displayed.
* If there is a signed certificate, click “Browse” to select it and then click “Install” to install it.
* Click “Create a private certificate” to enter the following creation interface.
Click the “Create” button to create a private certificate. Enter the country (only two letters
available), domain (camera’s IP address/domain), validity date, password, province/state,
region and so on. Then click “OK” to save the settings.
* Click “Create a certificate request” to enter the following interface.