User's Manual

52
Face Recognition &Access Control Terminal User Manual
Supports multi-stream real time transmission
Network Protocol
UDP, IPv4, IPv6, DHCP, NTP, RTSP, PPPoE, DDNS, SMTP, FTP, UPnP, HTTPS,
HTTP
Interface Protocol
ONVIF
Storage
Network remote storage
Smart Alarm
IP address conflict; cable disconnection
Intelligent Analytics
Liveness Detection, face detection, face capture, face match, scene change detection,
video blur detection, video color cast detection
General Function
Watermark, IP address filtering, video mask, heartbeat, illegal login, image distortion
correction
White Light Distance
0.3-1m soft light
IR Light Distance
0.3-2m
Face
Height Range of Face
Recognition
1.2m-2.2m (the recommended installation height is 1.45m, based on the tester’s height
of 170cm)
Face Recognition Distance
0.3m-1.5m (the recommended face recognition distance is from 0.5m to 1m)
Face Detection
Pupil distance of a facial image over 20 pixel can be detected
Face Capture
Outputting the optimal face image by precise detecting, tracing, capturing, scoring and
screening the moving faces
Original Image Capturing
Supports original image capturing and self-defined overlaid information (like device
ID, time, etc.)
Face Picture Database
10,000
Face Comparison Storage
30,000
Database Management
Face pictures can be added, modified or deleted in the face database.
Face Picture Adding
Adding face pictures through WEB and face album manager tool
Face Comparison Alarm
Face detection alarm, allow list, block list and stranger alarm
Intelligent Light Compensation
Built-in high efficient white light LEDs
Others
Power
DC12V/1A
Power Consumption
< 12W
Environmental Protection
RoHS 2.0, REACH, WEEE, directive94/62/EC
Working Environment
-20
℃
~50
℃
, Humidity: less than 95% (non-condensing)
Dimensions(mm)
244.6
×
120.4
×
30
Weight (net)
Approx. 520g
Installation
Wall mounting; Standing on desktop; Pole mounting, etc.